⟁ Ohio Well Data field records · 2026 survey

Ohio Well Data › Clermont County

Clermont County, Ohio: well depth, water level & drilling cost

✓ 689 ODNR records · verified 2026-06-29

72 ftmedian well depth
60 ft–90 fttypical depth range
25 ftmedian static water level
6 gpmmedian yield (577 tests)

How deep are wells in Clermont County, Ohio?

The median drilled well depth in Clermont County is 72 ft, based on 687 wells with recorded depths in the state ODNR database. Half of all wells fall between 60 ft and 90 ft; 90% are shallower than 120 ft. Wells drilled since 2016 have a median depth of 60 ft.

How much does it cost to drill a well in Clermont County?

Applying published per-foot rates to the local median depth of 60 ft: drilling and casing alone typically runs $1,500–$3,900; a complete system including pump, pressure tank, and hookup typically runs $3,600–$6,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Clermont County?

The median static water level is 25 ft below ground surface (middle half of wells: 15 ft–40 ft), from 565 measurements.

How much water do wells in Clermont County produce?

The median tested yield is 6 gpm (middle half: 2 gpm–15 gpm), from 577 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Clermont County address — $19

Drilled depth distribution

0–50 ft 49 50–100 ft 498 100–150 ft 112 150–200 ft 21 200–300 ft 6 300–400 ft 1 400–600 ft 0 600+ ft 0

Who drills wells in Clermont County?

Companies by number of wells completed in this county since 2016, per filed well logs (ODNR Division of Geological Survey).

DrillerWells since 2016
YEAGER WELL DRILLING & PUMPS16
CRABTREE DRILLING4
GREGORY DRILLING LLC3

Get quotes from local drillers

Looking at a specific property in Clermont County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.