Ohio Well Data › Clinton County
Clinton County, Ohio: well depth, water level & drilling cost
✓ 2,129 ODNR records · verified 2026-06-29
How deep are wells in Clinton County, Ohio?
The median drilled well depth in Clinton County is 95 ft, based on 2,127 wells with recorded depths in the state ODNR database. Half of all wells fall between 66 ft and 122 ft; 90% are shallower than 157 ft. Wells drilled since 2016 have a median depth of 100 ft.
How much does it cost to drill a well in Clinton County?
Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Clinton County?
The median static water level is 20 ft below ground surface (middle half of wells: 12 ft–40 ft), from 1,957 measurements.
How much water do wells in Clinton County produce?
The median tested yield is 10 gpm (middle half: 6 gpm–17 gpm), from 1,943 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Clinton County address — $19
Drilled depth distribution
Who drills wells in Clinton County?
Companies by number of wells completed in this county since 2016, per filed well logs (ODNR Division of Geological Survey).
| Driller | Wells since 2016 |
|---|---|
| HAMILTON & SONS WELL DRILLING | 49 |
| GREGORY DRILLING LLC | 28 |
| VERNON GREGORY WELL DRILLING | 15 |
| BUCKEYE WELL & PUMP LLC | 10 |
| WALTER'S WELL DRILLING | 8 |
| CRABTREE DRILLING | 6 |
| BAPST INC | 5 |
| GREGORY WELL DRILLING | 4 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Clinton County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Wilmington (45177) — 369 wells, median 100 ft
- Sabina (45169) — 229 wells, median 100 ft
- New Vienna (45159) — 80 wells, median 102 ft
- Martinsville (45146) — 60 wells, median 131 ft
- Blanchester (45107) — 55 wells, median 120 ft
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.