Ohio Well Data › Morgan County
Morgan County, Ohio: well depth, water level & drilling cost
✓ 1,239 ODNR records · verified 2026-06-29
How deep are wells in Morgan County, Ohio?
The median drilled well depth in Morgan County is 76 ft, based on 1,239 wells with recorded depths in the state ODNR database. Half of all wells fall between 54 ft and 100 ft; 90% are shallower than 142 ft. Wells drilled since 2016 have a median depth of 98 ft.
How much does it cost to drill a well in Morgan County?
Applying published per-foot rates to the local median depth of 98 ft: drilling and casing alone typically runs $2,450–$6,370; a complete system including pump, pressure tank, and hookup typically runs $5,880–$9,800. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Morgan County?
The median static water level is 30 ft below ground surface (middle half of wells: 18 ft–50 ft), from 1,131 measurements.
How much water do wells in Morgan County produce?
The median tested yield is 2 gpm (middle half: 1 gpm–10 gpm), from 967 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Morgan County address — $19
Drilled depth distribution
Who drills wells in Morgan County?
Companies by number of wells completed in this county since 2016, per filed well logs (ODNR Division of Geological Survey).
| Driller | Wells since 2016 |
|---|---|
| D & L DRILLING LLC | 26 |
| WARTHMAN DRILLING INC | 9 |
| JET WATER WELL DRILLING | 9 |
| KEEN WELL AND PUMP | 8 |
| RAMSEY DRILLING | 8 |
| SMITH'S WELL DRILLING LLC | 6 |
| HURLEY'S WATER WELL DRILLING | 4 |
| CLAIR WELL SERVICE | 3 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Morgan County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Mcconnelsville (43756) — 110 wells, median 80 ft
- Stockport (43787) — 96 wells, median 100 ft
- Malta (43758) — 51 wells, median 120 ft
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.