⟁ Ohio Well Data field records · 2026 survey

Ohio Well Data › Pike County

Pike County, Ohio: well depth, water level & drilling cost

✓ 927 ODNR records · verified 2026-06-29

70 ftmedian well depth
53 ft–100 fttypical depth range
25 ftmedian static water level
7 gpmmedian yield (749 tests)

How deep are wells in Pike County, Ohio?

The median drilled well depth in Pike County is 70 ft, based on 926 wells with recorded depths in the state ODNR database. Half of all wells fall between 53 ft and 100 ft; 90% are shallower than 142 ft. Wells drilled since 2016 have a median depth of 102 ft.

How much does it cost to drill a well in Pike County?

Applying published per-foot rates to the local median depth of 102 ft: drilling and casing alone typically runs $2,550–$6,630; a complete system including pump, pressure tank, and hookup typically runs $6,120–$10,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Pike County?

The median static water level is 25 ft below ground surface (middle half of wells: 15 ft–40 ft), from 786 measurements.

How much water do wells in Pike County produce?

The median tested yield is 7 gpm (middle half: 2 gpm–16 gpm), from 749 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Pike County address — $19

Drilled depth distribution

0–50 ft 167 50–100 ft 526 100–150 ft 151 150–200 ft 46 200–300 ft 32 300–400 ft 4 400–600 ft 0 600+ ft 0

Who drills wells in Pike County?

Companies by number of wells completed in this county since 2016, per filed well logs (ODNR Division of Geological Survey).

DrillerWells since 2016
PEERLESS MIDWEST7
BAPST INC6
SMITH'S WELL DRILLING LLC5
WALTER'S WELL DRILLING4
VERNON GREGORY WELL DRILLING1
OTHER1
TAYLOR WELL DRILLING1
HAVENS & SONS DRILLING1

Get quotes from local drillers

Looking at a specific property in Pike County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.